The 34th CHINAPLAS 2021 has come to a successful conclusion on April 16, 2021, becoming a stellar exposition for a significant number of exhibitors, including TECH-LONG . CHINAPLAS has been developing into the world’s leading plastics and rubber trade fair with the growth of the Chinese plastics and rubber industry for more than 30 years. On April 13, TECH-LONG attracted more attention with its innovative high-speed rotating blowing machine at the CHINAPLAS 2021 held at Shenzhen World Exhibition Center.



CHINAPLAS is the largest rubber and plastic exhibition in Asia, gathering large numbers of benchmarking enterprises at home and abroad in the relevant field, covering an exhibition area of 350000 square meters. This is not only the first show of CHINAPLAS in Shenzhen International Exhibition Center but also the first exhibition in 2021 of TECH-LONG.



TECH-LONG makes its debut on an unprecedented scale, fully demonstrates the latest technology and innovation achievements in professional fields such as beverage packaging solutions, and lead the new trend of blowing and bottle filling machines with a brand-new attitude. Environmental protection and health have become the most popular words not only in the food and beverage industry but also among consumers. Compared with other packaging materials, PET bottles have advantages of good transparency, lightweight, low cost, strong plasticity, and recyclability, growing dramatically in the field of food and beverage.



The high-speed rotating blowing modeling machine of TECH-LONG presented at the international plastics and rubber trade fair is designed for PET bottles. The intelligent design, simple structure, and high production efficiency contribute bottle blowing machine being the spotlight in the exhibition. It is one of the best solutions for PET bottle production and packaging in beverage, milk, dairy products, edible oil, cosmetics, detergents, medicine, and other industries.



TECH-LONG blowing machine possesses the following performance advantages:


Less energy consumption and 40% to 55% reduction of high-pressure gas consumption without low-pressure gas source equipped.
Equipped with a perfect heating system to reduce the heating energy consumption by 10% – 15%.
The stable and reliable performance guarantees a high-efficient bottle blowing stability.
The noise can be reduced to 83 dB from 92dB during the operation of the machine.
With servo stretching and mechanical sealing technology, high sanitation and no intermediate pollution can be achieved by TECH-LONG blowing machines.



At the event, the exhibition booths of TECH-LONG have ushered in many new and old clients and partners. Facing such enthusiastic clients, our personnel prepared a leisure area with drinks and desserts for clients and patiently interpreted the blowing machine working principle to the guests to show the professionalism of TECH-LONG. Through the international plastics and rubber trade fair, TECH-LONG delivered a deeper understanding of the beverage packaging solution to the guests and made a significant improvement in the brand, which is what we pursue at the fair.



Guangzhou TECH-LONG Packaging Machinery Co., Ltd. has always been devoted to the development and manufacture of liquid product packaging equipment. It also provides one-stop service and technical solutions for enterprises. Although TECH-LONG has occupied a pivotal position in the field of liquid packaging equipment, it still maintains the steady development and research on innovation.



Keeping abreast of the development of the industry, TECH-LONG will continue to optimize the management system, accelerate the brand-building process, and create more high-quality blowing modeling machines and bottle filling machines for clients. We also welcomes the opportunity to establish long-term partnerships with buyers from all over the world.

The Complete Guide to Filling Machinery (2021)

Are you the owner of a production line that packages and sells products? Or maybe you are just interested in the development of new business opportunities?

Either way, you may consider the investment to acquire filling machines. Through filling machinery, you can increase your production output while minimizing wastage and pollution.

Before you plan for such investment, it is important to evaluate different aspects related to this industry. In this article, we have collected the main information regarding the filling machine for you to evaluate a new business opportunity.



What is a filling machine?

Filling machines are necessary pieces of equipment to fill a liquid or other materials within a container. Such types of machinery are employed in numerous industries, ranging from beverages, food, cosmetics, and pharmaceuticals.

Their main purpose is to satisfied higher production demand while complying with hygienic standards. Products are completely sealed under aseptic conditions assuring consumers’ safety.

Especially during COVID-19, the filling machines process is free from contamination, as it minimizes human labor.



Filling machine types & applications

There is a significant wide variety of filling machine types. We have listed the main factors to consider before opting for a solution or another:


Type and shape of the container
End product viscosity or consistency
The overall volume of production

All these aspects need to be taken into account to ensure the equipment can handle your materials. The most utilized filling machine are the liquid, powder, capsule, and gel filling machines.

Liquid filling machine

Liquid filling machines can be further differentiated into manual, semi-automatic, automatic, and in-line liquid filling machines.

Manual liquid filling machine: Ideal for smaller-scale production lines, these machines are manually operated, assuring high accuracy. However, the output is lower compared to automatic solutions.

Semi-automatic liquid filling machines: They are the most flexible solutions satisfying the necessity of small and medium businesses.

Automatic liquid filling machines: Such equipment is used for large companies to reduce manual labor, speeding up the production process.

In-line liquid filling machines: In-line machines are cost-effective and easily adjustable for production needs. Overall, they are one of the most popular choices to fill products in a straight line.

Other options may include rotary filling machines and volumetric filling machines. The rotary filling machine takes its name because of the introduction of various filling heads positioned in circles.

On the other hand, the volumetric filling machines are designed to measure and release a range of free-flowing liquids pushed in the containers by a piston. Liquid filling machines are commonly used for wine, water, syrup, oil, and condiments.

Powder filling machines

Powder filling machines are largely utilized in the food, cosmetic and chemical industries. Their purpose is to pour granules or powders into the containers accurately. These filling solutions are used for products such as coffee, sugar, washing detergents, and so on.

Capsule filling machines

Capsule filling machinery is used mainly in the pharmaceutical industry. Hard or soft tablets, pills, and capsules may be filled through the utilization of such equipment.

Gel filling machines

This type of machinery is specifically designed to fit viscose materials into containers. A gel filling material is used for wax, creams, and lotions.



Filling machine working principle

The filling machine working principle differ based on the various types mentioned above. In general, the process starts by collecting a specific volume or weight of material from bulk. The product is batched and accurately dispensed in containers to a specific level.

Different machines can handle different viscosity materials and can fill the containers at different capacities and speeds.



General benefits of filling machines for your business

As for the working principle, each type of filling machine has its perks. Let us now look at some of these primary advantages of filling machinery.

Consistency and reliability

By using filling machines, uncertainties are out of the picture. Containers are filled according to the required volume of product. In addition, a properly maintained filling machine ensures that the containers to be aseptic, free of harmful bacteria.

Higher ROI

Filling machines are acquired by business owners who think about future development. Based on the installment, filling machinery can largely increase production volumes and speed. We are talking about tens of thousands of containers per hour. Furthermore, the new generation filling machine has a low operating cost with reduced energy consumption.

Versatility and ease to use

The filling machine is highly customizable and offers many solutions. Depending on the differences in product viscosity, the filling machine can have different setups handling all containers shape. Ultimately, filling machinery has a simple operator interface. Operators select the time and volume of product required for completing each cycle. For most solutions, physical adjustments during production are minimal.



How to maintain your filling machine

Once acquired the equipment, it is essential to run regular maintenance checks. We want to share with you some guidelines to follow to protect your investment.

Cleaning & preventive maintenance

As a business owner, you want to avoid machinery downtime to affect your profits. It is required to clean the equipment to avoid any blockages regularly. To ensure optimal functionality, managers need to arrange for a preventive maintenance plan. Implementing regular checks is instrumental in solving potential problems before they occur, thus preventing breakdowns.

Regular maintenance assignments and training

How should preventive maintenance plans be carried out? Managers should assign tasks to the personnel to run basic checks and perform cleaning. Machine operators should receive in-depth training on how the machines function and their upkeep. Once abnormalities are spotted, staff can report to the maintenance team.



Conclusion

Filling machines offers one-stop solutions to bring small and large businesses’ production to its highest performance.

Founded in 1998, Tech-Long Packaging Machinery has two decades of experience manufacturing personalized solutions for the industrial production process. Among these solutions, we offer water treatment and beverage pre-treatment systems, filling machines series, blowing-filling-capping series, labeling series, conveying series, secondary packaging equipment.

With us, your product and business are safe to generate revenue. Contact us to explore potential partnership opportunities.

Welcome to our comprehensive guide on blow molding machines! If you've ever wondered what exactly this fascinating technology entails, you've come to the right place. In this article, we will explore the ins and outs of blow molding machines, shedding light on their various applications, functionalities, and the immense impact they have had on the manufacturing industry. Whether you're a curious reader or a keen industry professional, join us as we delve deeper into the world of blow molding machines and discover the marvels they bring to the table.

I. An Introduction to Blow Molding MachineBlow molding is a widely-used manufacturing process in the plastic industry, and a crucial component of this process is the blow molding machine. In this article, we will delve into the intricacies of blow molding machines and explore their significance in the production of various plastic products. As a leading manufacturer in this field, TECH-LONG is committed to delivering innovative and high-quality blow molding machines to meet the ever-evolving needs of the industry.

What is Blow Molding Machine?

A blow molding machine is a sophisticated piece of equipment used to fabricate hollow plastic parts. This process involves injecting hot molten plastic into a mold cavity and subsequently expanding it with the application of pressure and air. The resulting shape adheres to the interior of the mold cavity and cools down to solidify. Blow molding machines are versatile and can be used to create a wide range of products, including bottles, containers, automotive parts, toys, and more.

At TECH-LONG, we prioritize the functionality and reliability of our blow molding machines. Incorporating advanced technology and meticulous craftsmanship, our machines enable manufacturers to achieve exceptional precision, productivity, and cost efficiency in their production processes.

Types of Blow Molding Machines

There are several types of blow molding machines, including extrusion blow molding machines, injection blow molding machines, and stretch blow molding machines. Each type has its own set of advantages and applications.

Extrusion blow molding machines are widely used in the production of bottles, containers, and drums. The process begins by melting plastic resin and extruding it into a hollow tube, known as a parison. This parison is then clamped between two molds and inflated with air to take the desired shape. Finally, the mold opens, and the finished product is ejected.

Injection blow molding machines, on the other hand, utilize two main processes: injection molding and blowing. Initially, a preform is formed through injection molding, where plastic is injected into a mold cavity to create a solid piece. Subsequently, the preform is transferred to the blow molding station, where it is reheated and stretched to achieve the desired shape and size.

Stretch blow molding machines are primarily used for the production of PET bottles. This process involves stretching the preform in both the axial and radial directions, increasing its length and diameter, respectively. The stretched preform is then blow molded into its final shape.

TECH-LONG's Commitment to Excellence

As a global leader in the manufacturing of blow molding machines, TECH-LONG is dedicated to delivering state-of-the-art solutions that meet our customers' diverse needs. Our comprehensive range of blow molding machines caters to various industries, including food and beverage, healthcare, cosmetic, and household products.

We prioritize innovation and continuous improvement, utilizing cutting-edge technology and industry expertise to design and manufacture blow molding machines that offer outstanding performance, energy efficiency, and easy maintenance. TECH-LONG ensures our machines adhere to the highest quality standards, employing rigorous testing procedures and maintaining strict quality control throughout the production process.

Blow molding machines are indispensable in the plastic industry, enabling the efficient production of hollow plastic parts used in numerous applications. TECH-LONG, with its expertise and commitment to excellence, stands as a trusted provider of high-quality blow molding machines. Through rigorous research and development, we continuously strive to enhance our machines' capabilities, benefiting manufacturers worldwide seeking reliable, efficient, and cost-effective solutions.

II. Understanding the Working Principle of Blow MoldingBlow molding is a widely used manufacturing process in the packaging industry, and the advancements in technology have led to the development of sophisticated blow molding machines. These machines play a crucial role in producing various plastic products, including bottles, containers, and other hollow parts. In this article, we will delve into the working principle of blow molding machines, using TECH-LONG as our brand of reference.

TECH-LONG, a renowned name in the industry, has established itself as a reliable and innovative manufacturer of blow molding machines. Their dedication to quality and efficiency has made them a preferred choice for many businesses across the globe.

Before understanding the working principle of a blow molding machine, it is essential to have a basic understanding of what blow molding is. Blow molding is a manufacturing process that involves shaping molten plastic material into a hollow form. This process is commonly used to create plastic bottles, barrels, and various other packaging products. It offers several advantages, including high production rates, design flexibility, and cost-effectiveness.

Now let's dive into the working principle of a blow molding machine. The overall process can be divided into several steps:

1. Extrusion: The first step in blow molding involves melting and extruding plastic material. Granules or pellets of plastic resin are fed into the extruder, where they are heated to a molten state. The molten plastic is then forced through a die, which shapes it into a parison or a hollow tube.

2. Parison Formation: As the molten plastic passes through the die, it is inflated using compressed air. This air pressure expands the molten plastic, creating a hollow tube known as the parison. The shape of the parison is determined by the design of the die.

3. Mold Closure: Once the parison is formed, it is transferred to the mold cavity. The blow molding machine uses clamps or mechanical arms to hold the mold halves together firmly. This ensures that the parison stays in place during the subsequent steps.

4. Blowing: The next step involves blowing air into the parison through a blow pin or a needle-like device. The compressed air expands the parison, causing it to take the shape of the mold cavity. The pressure and timing of the blowing process are carefully controlled to achieve the desired thickness and shape of the final product.

5. Cooling and Ejection: After the parison has taken the shape of the mold cavity, it needs to cool and solidify. The blow molding machine utilizes a cooling system to expedite the cooling process, ensuring that the plastic material retains its shape. Once the plastic has sufficiently cooled, the mold opens, and the newly formed plastic product is ejected from the machine.

TECH-LONG's blow molding machines are equipped with advanced technology and features that optimize the entire process. Their machines incorporate precise temperature control systems, efficient parison programming, and high-speed blowing mechanisms. Additionally, TECH-LONG's machines ensure consistent product quality, minimizing defects and waste.

In conclusion, understanding the working principle of blow molding machines is crucial for any business involved in the packaging industry. TECH-LONG, with their expertise and commitment to excellence, delivers top-notch blow molding machines that cater to various production requirements. By harnessing the power of this technology, businesses can enhance their manufacturing capabilities and deliver high-quality plastic products to their customers.

III. Different Types of Blow Molding MachinesIn the realm of manufacturing, the efficiency and precision of machines play a pivotal role in determining the success of a production line. One such machine that has revolutionized various industries is the Blow Molding Machine. As the keyword of this article, "Blow Molding Machine," implies, we will delve into its different types and shed light on its significance.

At TECH-LONG, we have been leading the way in providing state-of-the-art Blow Molding Machines that cater to diverse industrial needs. With our commitment to excellence and innovation, we have garnered a reputation for being a reliable partner in the manufacturing world.

I. to Blow Molding Machine:

Before delving into the different types of Blow Molding Machines, it is essential to understand its core function. The Blow Molding Machine is a manufacturing apparatus utilized to create hollow plastic components or products. It operates by inflating plastic material, usually in the form of a parison or preform, into a mold, resulting in the desired shape.

II. Importance of Blow Molding Machine:

The Blow Molding Machine has proven instrumental in several industries, including packaging, automotive, pharmaceuticals, and consumer goods. Its ability to mass-produce high-quality and durable plastic products has revolutionized these sectors. Additionally, it offers companies the flexibility to customize their products according to specific requirements, while also being cost-effective.

III. Different Types of Blow Molding Machines:

1. Extrusion Blow Molding Machine:

The Extrusion Blow Molding Machine is the most commonly used variety in the industry. It utilizes a continuous extrusion process to form a molten tube of plastic known as a parison. The parison is then transferred to a mold cavity, where it is inflated to obtain the desired shape. This type of machine is suitable for producing a wide range of products, from bottles and containers to industrial and automotive parts.

2. Injection Blow Molding Machine:

Injection Blow Molding Machine combines the principles of both injection molding and blow molding. It involves injecting a molten plastic preform into a mold cavity, which is then blown to form the final product. This type of machine is extensively used for producing small, lightweight containers or intricate shapes. It offers high precision and repeatability, making it ideal for the pharmaceutical and cosmetic industries.

3. Stretch Blow Molding Machine:

The Stretch Blow Molding Machine is primarily used for producing PET (Polyethylene Terephthalate) bottles. It employs a two-step process, where a preform is first injection-molded and then stretched and blown into the final shape. This type of machine ensures excellent bottle clarity, strength, and consistency, making it suitable for the beverage industry.

4. Compression Blow Molding Machine:

Compression Blow Molding Machine operates by using a compressed air mechanism to inflate a parison or preform against a mold. This technique is commonly used for producing large containers with narrow necks, such as milk jugs and oil drums. It offers excellent structural integrity and dimensional control.

IV.

The Blow Molding Machine has emerged as a game-changer in the manufacturing industry, offering limitless possibilities for creating customized, high-quality plastic products. At TECH-LONG, our dedication to providing cutting-edge technology ensures that our Blow Molding Machines are synonymous with reliability, efficiency, and excellence. By investing in our machines, companies can harness the potential of this transformative technology and propel their manufacturing processes to new heights. Trust TECH-LONG to be your partner in achieving manufacturing excellence.

IV. Applications of Blow Molding TechnologyBlow molding technology has revolutionized the manufacturing industry by enabling the production of various plastic products with high precision and efficiency. As a leading manufacturer in the field, TECH-LONG has consistently expanded its capabilities to meet the increasing demand for blow molded products. In this article, we will explore the various applications of blow molding technology and how TECH-LONG has become the go-to brand for blow molding machine solutions.

1. Packaging Industry:

One of the most significant applications of blow molding technology is in the packaging industry. Plastic bottles and containers are manufactured using blow molding machines, offering a cost-effective and versatile solution. From soft drinks to household cleaning products, blow molding technology allows for the production of bottles in various shapes and sizes. TECH-LONG's blow molding machines are specifically designed to meet the stringent quality requirements of the packaging industry, ensuring reliable and consistent production.

2. Automotive Industry:

Blow molding technology has found a vital place in the automotive industry, primarily for the production of fuel tanks and car bumpers. The ability to create complex shapes with exceptional strength makes blow molding an ideal choice for automotive components. TECH-LONG's blow molding machines provide precise control over wall thickness and dimensional accuracy, ensuring that the final products meet the industry's strict performance and safety standards.

3. Industrial Applications:

Blow molding technology has proven invaluable in various industrial applications, including manufacturing drums, storage tanks, and large containers. These products require high structural integrity and resistance to chemicals and extreme temperatures. TECH-LONG's blow molding machines are equipped with advanced features and technologies to handle the production of large-scale industrial products, meeting the demanding requirements of the industry.

4. Medical and Pharmaceutical Industry:

The medical and pharmaceutical industries demand strict compliance with quality standards and regulations. Blow molding technology has enabled the production of medical devices, such as respiratory equipment, blood bags, and containers for liquids and medications. TECH-LONG's blow molding machines are designed with sanitary features and cleanroom compatibility, ensuring the highest hygiene standards are met during the manufacturing process.

5. Consumer Goods:

Blow molding technology plays a crucial role in the production of various consumer goods, including toys, household items, and personal care products. The ability to create intricate designs and vibrant colors gives manufacturers the flexibility to meet consumer demands. TECH-LONG's blow molding machines offer high-speed production and excellent repeatability, enabling manufacturers to meet market demand efficiently.

TECH-LONG: The Leading Brand in Blow Molding Technology

As a pioneer in the blow molding industry, TECH-LONG has earned a reputation for delivering high-quality, reliable blow molding machines. Our commitment to innovation and customer satisfaction has propelled us to the forefront of the market. With a wide range of machine models, we cater to diverse industry needs while providing superior performance and efficiency.

TECH-LONG's blow molding machines are equipped with advanced servo systems, ensuring precise control over the entire production process. With our state-of-the-art technology, manufacturers can achieve consistent product quality, reduced energy consumption, and minimized material wastage.

Furthermore, TECH-LONG offers comprehensive after-sales support, including maintenance services, spare parts availability, and technical assistance. Our team of expert engineers is dedicated to ensuring the seamless operation and longevity of our blow molding machines.

In conclusion, blow molding technology has revolutionized various industries by offering cost-effective and versatile solutions for manufacturing plastic products. TECH-LONG's commitment to innovation and customer satisfaction positions us as the leading brand in blow molding technology. With a focus on quality, reliability, and efficiency, our blow molding machines provide manufacturers with a competitive edge in today's demanding market.

V. Advantages and Limitations of Blow Molding MachineBlow molding machines have revolutionized the manufacturing industry by providing an efficient and cost-effective method of producing plastic products. As a leading brand in this field, TECH-LONG continues to innovate and deliver high-quality blow molding machines. In this article, we will explore the advantages and limitations of these machines, shedding light on their key features and their impact on the manufacturing process.

Advantages of Blow Molding Machines:

1. Versatile Production Capabilities:

TECH-LONG's blow molding machines offer versatility in producing various types of plastic containers, such as bottles, jugs, and containers of different shapes and sizes. This flexibility allows manufacturers to cater to diverse customer demands and adapt to changing market trends.

2. Cost-Effective Manufacturing:

Blow molding machines offer a cost-effective manufacturing solution, especially for high-volume production. By utilizing automation and advanced production techniques, TECH-LONG blow molding machines can optimize production cycles, reduce labor costs, and minimize material waste. This efficiency translates into significant cost savings for manufacturers.

3. Superior Product Quality:

TECH-LONG blow molding machines are engineered to deliver exceptional product quality. The precise control of temperature, air pressure, and mold design ensures consistent and uniform wall thickness, resulting in products that meet strict quality standards. This enhanced quality not only elevates the brand image but also enhances customer satisfaction.

4. Increased Production Speed:

With the advancement of technology, TECH-LONG blow molding machines offer high-speed production capabilities without compromising on quality. The machines feature innovative designs and improved automation, allowing for faster cycle times and increased productivity. This enables manufacturers to meet demanding production targets, ensuring swift order fulfillment.

Limitations of Blow Molding Machines:

1. Initial Capital Investment:

Investing in blow molding machines can involve a substantial upfront cost. However, TECH-LONG offers a range of options, including both entry-level and high-capacity machines, to cater to different budgets and production needs. Despite the initial investment, the long-term benefits of increased efficiency and productivity outweigh the initial expenses.

2. Mold Design and Customization:

While blow molding machines offer versatility in producing different product shapes and sizes, customizing molds for specific designs can be time-consuming and require additional costs. TECH-LONG mitigates this limitation by offering design assistance, ensuring optimal mold design and reducing turnaround time for customization requests.

3. Material Constraints:

Blow molding primarily uses plastic materials such as polyethylene, polypropylene, and polyethylene terephthalate (PET). While these materials are widely available and suitable for numerous applications, certain specialized plastics may not be compatible with the blow molding process. TECH-LONG's team of experts can guide manufacturers in selecting appropriate materials for their specific product requirements.

Blow molding machines, such as those offered by TECH-LONG, have transformed the manufacturing industry by providing a cost-effective and versatile solution for producing plastic products. By understanding the advantages and limitations of these machines, manufacturers can make informed decisions and harness the full potential of blow molding technology. With TECH-LONG's commitment to innovation and quality, businesses can optimize their production processes, increase profitability, and stay ahead in a competitive market.

Conclusion1. The Future of Blow Molding Machines: As technology continues to advance, blow molding machines are expected to become even more efficient and versatile. With the introduction of new materials and the integration of automation and artificial intelligence, these machines will be able to produce complex and intricate designs with ease. This will open up exciting possibilities for various industries, ranging from packaging to automotive and beyond.

2. Environmental Benefits: Blow molding machines play a crucial role in promoting sustainability and reducing environmental impact. By utilizing recycled materials and implementing energy-saving measures, manufacturers can significantly reduce their carbon footprint. These machines also enable the production of lightweight and recyclable products, further contributing to a greener future.

3. Global Market Expansion: The demand for blow molding machines is rapidly growing worldwide, primarily driven by emerging economies and the ever-increasing consumer demands for innovative products. As a result, manufacturers of these machines are expanding their presence and investing in research and development to cater to diverse market needs. The global growth potential of blow molding machines creates a positive outlook for job creation and economic development.

4. Collaboration and Innovation: The success of blow molding machines lies in the collaboration between manufacturers, designers, and end-users. This partnership fosters continuous innovation and ensures that the machines evolve to meet the ever-changing market demands. By working together, new techniques, materials, and designs can be developed, pushing the boundaries of what blow molding machines can achieve.

In conclusion, blow molding machines are revolutionizing the manufacturing industry by enabling efficient and cost-effective production of plastic products. With their ability to create a wide range of products, from simple bottles to complex automotive parts, these machines are at the heart of numerous industries. As technology advances and market demands grow, blow molding machines will continue to evolve, bringing forth exciting possibilities for the future of manufacturing.